How to Fix a Vacuum Hose?

How to Fix a Vacuum Hose?

Vacuum cleaners are great home appliances. One good vacuum cleaner can last for years. But like any other appliance, they need regular maintenance to maintain their level of performance. The vacuum hose is used to move the vacuum around the house to clean hard to reach areas. As a result, it can get damaged. Knowing how to fix a vacuum hose ensures that you can use it for long.

What is Wrong With the Hose?

Once you feel that you have to go over every area more than once to have it clean, then it is time to check your machine. Make sure that your motor is working and that the brush is rolling. If all is well, then you probably have a problem with your hose.

It is very important to check the hose for clogs. Sometimes, your machine will accidentally suck on a sock or a toy that will clog the hose. If you can see the clog, then try to remove it. Sometimes the clog is not to be seen. In that case, you have to remove the hose and use a broomstick handle to dislodge the clog. You should, however, be careful as the obstacle might have some sharp edges that might ruin your hose. After the clog is removed, you can reattach your hose and resume cleaning. You may wish to know about central vacuums, if you do then the aforementioned link is the best place for you.

How to Fix a Vacuum Hose?

If you can feel a leak in the hose, then you need to know how to fix it promptly. This will enable you to fix the damage without having to replace the hose. You need to examine the hose thoroughly for holes and punctures. Turn the machine on and feel the hose with your fingers. Check where you feel the air leaking, this is probably where you need to fix the hose.

There are several ways to fix a hose leak. You can easily use duct tape to cover a hole. Clean the leak to remove any dust or grease that might stop the tape from sticking properly. Next stretch the hose as much as you can. Simply wrap the tape around the leak and make sure that you apply pressure. The hose has dents and this might make the tape uneven. This is why you need to apply a thin layer and properly secure it before applying another one.

Having an exposed area of stickiness inside the hose is not the best option. You can spread some chalk or flour on the floor and clean this up. This will cover the interior sticky part of the hose to prevent the dust and debris from clogging your hose one more time.

If the leak is near the top of the hose, you can easily cut it off. Simply, remove the plastic connector and cut the damaged area. After that reattach the connector and resume using your hose. However, if your plastic connector is not removable, you won’t be able to do that.

When Do I Need to Replace My Hose?

If you find a lot of cracks then it is probably time to replace the hose. A good universal vacuum hose will work just fine. All you have to do is to make sure that it fits your vacuum. Even the best vacuum for commercial use will need regular maintenance. By time, the plastic hose will dry out and lose its ability to stretch. In that case, repairing the hose becomes a time consuming task.

One single crack can be easily fixed but if you start to see multiple cracks and punctures then it is time to let go of your old hose. Understanding how to fix a vacuum hose will make your machine last longer. However, sometimes buying a new hose could be the answer. You be the judge.

Reader Interactions